Finding my Skullcandy Indy Evo Not Pairing Together made me disappointed. However, I managed to give it a first-hand treatment, and they are alive. So, what are the reasons for Skullcandy not pairing?
The reasons for Skullcandy Indy Evo not pairing together are many. You can estimate the most prominent ones when the earbuds are out of range, not charged enough, encountering pairing problems, or connecting with outdated device updates.
In this article, I will explain why Skullcandy Indy Evo does not pair together. Also, finding the troubleshooting methods to correct the issue.
Skullcandy Indy Evo Not Pairing Together – Reasons
With their mono or stereo mode features, Skullcandy Indy Evo earbuds give you a powerful listening experience. The headset uses Bluetooth 5.0 and establishes the link between different devices. If you feel there may be compatibility issues. Do not do that because the versatile earbuds are compatible with Android and Apple devices.
Low Battery
You must know what low battery does to your earbuds and the impact on reducing their performance. The lesser the battery, the lower the performance of the earbuds. The Skullcandy earbuds also allow fast charging, providing 2 hours of playtime with only a 10-minute charge.
Also, you will not notice the headphones directly reject the pairing command by turning the Bluetooth off.
Beyond Range
Bluetooth earbuds undoubtedly are a source of recreation because they provide freedom to roam about without worrying about tackling the cords. Sometimes the perks may do the opposite. Keeping the Bluetooth headsets out of the range does not maintain a stable connection and keeps disconnecting.
Note: Skullcandy Indy Evo has a Bluetooth range of 10 meters.
Interference
Do you think Bluetooth devices are prone to interference and, in return, affect the pairing process? Well, the answer is yes. If you want a stable and long-lasting link between Skullcandy earbuds and your desired device, reduce the interference that comes within the range of Bluetooth.
Disabled Pairing Mode
Every headphone requires putting them into pairing mode before connecting to another device. You can name it discovery mode so that the device you want to connect quickly identifies the Bluetooth headset and pairs in no time. If your Skullcandy Indy Evo is not pairing, put them in pairing mode first.
How Do you Put Skullcandy Earbuds in Pairing Mode?
- Place the earbuds in the case while the lid is not closed
- Look for the earbuds to start flashing red
- Take out the earbuds until they show a Blue light
- The headphones are powered on and automatically pair with each other
- When you initiate connecting earbuds, the left bud blinks red and blue
Bluetooth Turned Off
You must have become the victim when you try pairing your earbuds with the mobile phone, and it turns deaf ears. Remember, the primary necessity of pairing is an active Bluetooth status.
Activated Mono Mode
Skullcandy Indy Evo is designed to utilize it in a single mode, where you can use one bud to fulfill the function. The mono mode activates when you take an earbud out of the case while they are powered on or connected.
Tidbits: Since the right one is a primary bud, you let the left one rest in the case
However, deactivating the phenomenon is a breeze and takes less than a second. Put the bud that you are using for mono mode in the case. It’s time to take both of them simultaneously, and you will find they are pairing together.
Outdated Firmware
The earbuds, whether they belong to any brand, work with the latest version or updates. Various technical glitches and software bugs are the surprises of outdated firmware, and you need to refresh them to ensure earbuds pair together.
How do I fix Skullcandy Not Pairing?
Fixing Skullcandy not pairing is an easy task after diagnosing the correct problems. You must follow the below-mentioned steps to initiate pairing effortlessly.
- Ensure the battery of the earbuds is fully charged
- Remove the interferences between the connecting device
- Place them in the range of each other
- Make sure you turn on the Bluetooth and put the headset into pairing mode.
- Ensure the connecting devices are compatible
- Restart/ Reset the earbuds
Pro Tip: press and hold the main button for 6 seconds will turn them off. Put them inside the case and take them out as they are now powered on.
How do I Reset my Indy Evo Earbuds?
Fidgeting while keeping the earbuds in your hands and thinking about what to do or what not? If yes, resetting is the ultimate solution to make your earbuds work again with the same momentum and energy. The steps are simple and await your pea-size attention.
- Unpair the earbuds from all the pairing lists.
- Turn off the Bluetooth from the device.
- Turn off the Skullcandy earbuds by pressing the button on the buds for 6 seconds.
- Press the power button for 10 seconds and reset them
- Earbuds will be powered on, sync the buds together
- Place them inside the case until the red light flashes
- Take them out; they start flashing Blue
FAQs
How do I get my Indy Evo to pair to each other?
You can pair your skullcandy earbuds by placing them in the case and waiting until they show red light. The next step is to remove them from the case to see the Blue light flash; the buds will turn on and connect. After synchronization, only the left bud will start blinking red and blue.
How do I get my Indy Evo out of mono mode?
Mono mode uses the primary bud while the other one is in the case. However, put the right earbud in the case and remove both simultaneously to ensure pairing together and deactivate the solo mode.
Final Thoughts | Skullcandy Indy Evo Not Pairing Together
skullcandy not pairing together is a problem you can remove by restarting or resetting the earbuds. In this article, I have detailed the quick steps to restart the headphones to ensure smooth functionality.
Recommended Articles: